| The Birdwire system is for use against pigeons and in areas where their presence is a very light population, it is ideal for new buildings as it will deter pigeons from landing. It is almost invisible from ground level and will give years of trouble free maintenance. Again we offer a full installation service or we can supply the products direct for self installation. |
| This system consists of sprung tensioned wires that are suspended between posts. As the pigeons try to land feet first they encounter the unstable wire and are deterred from trying to land on the structure. |  |
| Holes are drilled into the building structure and a nylon rivet placed into it. The stainless post is then hammered into the hole. A spring is then fastened to the post and then the nylon coated stainless wire strained between the posts. The wire is secured with a stainless crimp. The picture shows how the front wire needs to be angled on line with the front face of the ledge to prevent pigeons getting a foothold. |  |
| This picture shows our multi post system which consists of posts welded onto a continuous base. Any configuration can be fabricated to cover wide ledges. This enables fewer holes to be drilled to secure the posts, which speeds up installation time, and reduces the risk of damage to buildings. |  |
 |  |
